Tag Archives: seatpost

That’s right, the bolts to secure the saddle to the saddle rail clamp are way over tighten. As you can see from the following image, the holding rode had been bent. I am not sure if there is a suggested torque for such bolts. If there are none being mentioned …

There are times when you would need to cut down the Brompton seatpost. Here is how you do it:

Someone was asking on the procedures on removing the Brompton seatpost bung (Pre-2018 version) earlier in the day. Its really a 3 simple steps procedure. Unscrew, pop and release! The following explains: